Gaggia ANIMA PRESTIGE, Руководство по эксплуатации

Страница: 27 / 72

27
English
reassembling the Milk Carafe
1 To reassemble the milk dispensing spout, follow the steps from 2 to 4 in
“Disassembling the Milk Dispensing Spout” the opposite way.
2 Put the milk dispensing spout back in the upper part of the milk carafe.
3 Put the upper part of the milk carafe back in the milk carafe.
Note
: before putting the milk dispensing spout back in the upper part of the
milk carafe, place the pin inside the upper part in its right position. If the pin
is not in its right position, you cannot put the milk dispensing spout back in
the upper part of the milk carafe.
Monthly Cleaning of the Milk Carafe
For this cleaning cycle, use the “Milk circuit cleaner” for the cleaning of milk
circuits.
1 Pour a bag of milk circuit cleaning product in the milk carafe. Fill the milk
carafe using water up to the MAX level indication.
2 Insert the milk carafe in the machine and place a container under the milk
dispensing spout.
3 Press the
MENU
button, select
DrINKS
, confirm with the
OK
button and
scroll down to MILK FrOTH . Press the OK button to start dispensing the
cleaning solution.
4 Repeat step 3 until emptying the milk carafe.
5 When the carafe is empty, remove the container and the milk carafe from
the machine.
6 Wash the milk carafe thoroughly and fill it using running water up to the
MAX level indication.
7 Insert the milk carafe into the machine.
8 Place the container under the milk dispensing spout.
9 Press the MENU button and select MILK FrOTH in the DrINKS menu to
start the rinse cycle of the carafe.
10 Repeat step 9 until emptying the milk carafe.
Note : never ingest the solution dispensed at this stage.
11 Repeat steps from 6 to 10.
12 When the machine does not dispense water anymore, the cleaning cycle
is over.
13 Disassemble all components and wash them using running water. The
machine is ready for use.