10
ENGLISH
5
Place a container under the steam wand.
6
Press the “ ” button for 5 seconds to start dispensing hot water.
7
Dispense water until the no water LED light “ ” remains on.
8
At the end of this operation, fill the water tank again up to the MAX level. The
machine is now ready for use.
The automatic rinse cycle also starts automatically when the machine has been in
stand-by mode or turned off for more than 15 minutes.
At the end of the cycle, you can brew a coffee.
Note:
When you have not used the machine for two or more weeks, the machine
will automatically perform an automatic rinse cycle after you turn it on. Following
this, you need to perform a manual rinse cycle as described above.
“” Water Filter Installation
We recommend installing the “” water filter as this prevents limescale
build-up and preserves a more intense aroma to your espresso.
Water is a crucial part of every espresso, so it is most important to always have
it professionally filtered. Using the “” water filter will prevent mineral
deposits from building up and improve your water quality.
1
Remove the small white filter from the water tank and store it in a dry place.
Naviglio milk en-nl-pl.indd 10
01/08/2019 09:46:28
