Gaggia Milano CLASSIC, Руководство по эксплуатации

Страница: 19 / 36

19
ENGLISH
from the steam wand (see the chapter "Prepar-
ing hot water"), and switch off the machine by
pressing the on/off button (Fig.1-2).
5. Let the descaling solution take effect for
approximately 20 minutes with the machine
turned off.
6. Turn on the machine by pressing the on/off
button (Fig.1-2).
Dispense 2 cups of water (about 150 ml each)
from the steam wand, switch off the machine
by pressing the on/off button (Fig.1-2) and
leave it off for 3 minutes.
7. Repeat the water dispensing described in step
6, until the water tank is completely empty.
8. Rinse the water tank and fill it with fresh drink -
ing water.
9. Place a container under the steam wand. Open
the steam/hot water knob (Fig.1-7) slowly by
turning it counter-clockwise.
Press the brew button (Fig.1-1) and the steam
button (Fig.1-3).
10. Dispense the whole water tank content through
the steam wand. To stop dispensing, press the
brew button (Fig.1-1) and the steam button
(Fig.1-3) again and close the knob by turning
it clockwise.
11. Fill the water tank with fresh drinking water.
12. Place a suitable container under the filter
holder.
13. Press the brew button (Fig.1-1) and dispense
all the water in the tank. Once the water tank
is empty, stop dispensing by pressing the brew
button (Fig.1-1) and the steam button (Fig.1-3)
again. At the end, empty the container.
14. Remove the filter holder from the unit by turn -
ing it from right to left and rinse it with fresh
drinking water.
15. Repeat the operations from step 8 once again,
for a total of 4 tanks. The machine is now ready
to be used.
16. The descaling cycle is now complete.
17. Refill the water tank with fresh water. If neces -
sary, load the circuit as described in the chapter
"Loading the Circuit".
4219-465-02181 MANUAL GAG. CLASSIC-2019 RI9380 EN-KOR.indd 19 09/12/2019 16:37:29