Gaggenau VR 414 610, Руководство по установке, Страница: 7 / 40

7
Before You Begin
Tools and Parts Needed
▯
Screwdriver Torx T20
▯
Pencil
▯
Drill with ¼" (6 mm) bit
▯
Jigsaw
▯
Tape Measure
Note: Additional materials may be necessary for
installation in solid surface countertops. Contact the
countertop manufacturer.
Parts Included
Special accessories
You can order the following accessories from your
specialist dealer:
Use the accessories only as indicated. The
manufacturer assumes no liability for incorrect usage
of the accessories.
Cabinet Requirements
The minimum spaces that must be maintained when
installing the electric grill shall be:
VA 461 000 Cast roaster pan, small
VA 461 001 Cast roaster pan, large
LV 030 000 Lava stones (replaceable)
VA 440 010 Stainless steel appliance cover
VA 420 000 Connection strip for combination with
other Vario appliances in the 400 series
for flush installation
VA 420 001 Connection strip for combination with
other Vario appliances in the 400 series
for flush installation with appliance
cover/compensation strip
VA 420 010 Connection strip for combination with
other Vario appliances in the 400 series
for surface-mounted installation
VA 420 011 Connection strip for combination with
other Vario appliances in the 400 series
for surface-mounted installation with
appliance cover/compensation strip
VA 450 400 Appliance extension 15” (38 cm)
A minimum 30" (762 mm)
B minimum 8" (200 mm)
C
minimum 1
9
/
16
" (40 mm)
D
Stainless steel work surfaces: both work
surfaces must be permanently fitted on both
sides of the grill to protect the countertop when
the grill is installed separately.
When installed next to another Vario appliance, a
work surface must be fitted on the opposite side
to protect the countertop.
When installed between two other Vario
appliances, no work surface is required.
E maximum 13” (330 mm)
%
%
&
$
'
'
(