Home Connect
en
13
2.
Open the Home Connect settings menu.
→
"Opening or closing the Home Connect settings
a
The illuminated ring on the control knob lights up
blue.
3.
Turn the control knob to .
a
The illuminated ring on the control knob lights up
green.
a
After approx. 5 seconds, the illuminated ring on the
control knob flashes blue.
a
After a few seconds, the illuminated ring on the con-
trol knob lights up blue.
a
WiFi is deactivated.
4.
Close the Home Connect settings menu.
→
"Opening or closing the Home Connect settings
a
The illuminated ring on the control knob goes out.
5.
If you want to switch the Wi-Fi back on, work
through the same operating sequence.
a
The illuminated ring on the control knob lights up
blue.
a
After approx. 5 seconds, the illuminated ring on the
control knob flashes blue and then lights up green.
9.10 Changing from LAN connection to Wi-
Fi connection
1.
Connect the downdraft ventilation to the router
(RJ45 cable).
2.
Carry out the following operating steps without inter-
ruption.
3.
Open the Home Connect settings menu.
→
"Opening or closing the Home Connect settings
a
The illuminated ring on the control knob lights up
green.
4.
Turn the control knob clockwise to .
a
After approx. 5 seconds, the illuminated ring on the
control knob lights up blue.
a
The connection is established via LAN.
5.
Close the Home Connect settings menu.
→
"Opening or closing the Home Connect settings
a
The illuminated ring on the control knob goes out.
9.11 Changing from Wi-Fi connection to
LAN connection
1.
Carry out the following operating steps without inter-
ruption.
2.
Open the Home Connect settings menu.
→
"Opening or closing the Home Connect settings
a
The illuminated ring on the control knob lights up
green.
3.
Turn the control knob clockwise to .
a
After approx. 5 seconds, the illuminated ring on the
control knob lights up green.
a
The connection is established via Wi-Fi.
4.
Disconnect the connection between the downdraft
ventilation and the router (RJ45 cable).
9.12 Resetting the Home Connect
connection
You can reset the connections you have saved on your
home network and on the hob at any time.
1.
Open the Home Connect settings menu.
→
"Opening or closing the Home Connect settings
a
The illuminated ring on the control knob lights up
blue.
2.
Turn the control knob clockwise to .
a
After approx. 30 seconds, the illuminated ring on
the control knob lights up green.
a
The Home Connect settings have been reset. The
appliance is no longer displayed in the Home Con-
nect app.
3.
Close the Home Connect settings menu.
→
"Opening or closing the Home Connect settings
a
The illuminated ring on the control knob goes out.
9.13 Software update
Your appliance's software can be updated using the
software update function, e.g. for the purposes of op-
timisation, troubleshooting or security updates.
To do this, you must be a registered Home Con-
nect user, have installed the app on your mobile device
and be connected to the Home Connect server.
As soon as a software update is available, you will be
informed via the Home Connect app and will be able to
start the software update via the app. Once the update
has been successfully downloaded, you can start in-
stalling it via the Home Connect app if you are in your
home network (Wi-Fi). The Home Connect app informs
you once installation is successful.
Notes
¡
The software update consists of two steps.
–
The first step is the download.
–
The second step is the installation on your appli-
ance.
¡
You can continue to use your appliance as normal
while updates are downloading. Depending on your
personal settings in the app, software updates can
also be set to download automatically.
¡
Installation takes a few minutes. You cannot use
your appliance during installation.
¡
We recommend that you install security updates as
soon as possible.
9.14 Remote diagnostics
Customer Service can use Remote Diagnostics to ac-
cess your appliance if you contact them, have your ap-
pliance connected to the Home Connect server and if
Remote Diagnostics is available in the country in which
you are using the appliance.
Tip:
For further information and details about the avail-
ability of Remote Diagnostics in your country, please
visit the service/support section of your local website:
www.home-connect.com
Содержание VL414115
Страница 1: ...en User manual and installation instructions VL414115 Extractor hood Gaggenau ...
Страница 30: ......
Страница 31: ......
