Gaggenau VK 411, Инструкции по эксплуатации и сборке

Страница: 18 / 24

Preparing the cabinet
• Cut out the recess for the hob in your worktop.
Proceed as indicated on the installation sketch.
The installation sketch contains the measurements
of the space required for the trim between the
appliances. Several appliances can also be
installed in individual recesses, as long as a
minimum clearance of 50 mm is kept to between
the appliances.
• As shown in the installation sketch, drill the
Ø 35 mm holes to secure the control knobs in the
cabinet front.
• If the cabinet front is thicker than 26 mm, the front
must be routed from the back to max. 26 mm on
an area of 80 x 310 mm.
16
72
280
76
220
min.105
max.162,5
8
190
510
280
min. 50
min. 35
1170
35
765
360
1575
60
490
380
90
D > 26
D = 26
80 x
310
min. 5
16 – 26
min. 5