Gaggenau VI23212 Series, Руководство пользователя и инструкция по установке, Страница: 16 / 24

en
Troubleshooting
16
14.3 Cleaning
Question Answer
How can I clean the hob?
¡
You can achieve the best results by using special glass-ceramic cleaning
products. Do not use harsh or abrasive cleaning products, dishwater deter-
gent (concentrated) or scouring pads.
You can find more information about this under
→
"Cleaning and servicing", Page 14 .
Troubleshooting
15 Troubleshooting
You can rectify minor faults on your appliance yourself.
Read the troubleshooting information before contacting
after-sales service. This will avoid unnecessary costs.
WARNING ‒ Risk of injury!
Improper repairs are dangerous.
▶
Repairs to the appliance should only be carried out
by trained specialist staff.
▶
If the appliance is defective, call Customer Service.
→
"Customer Service", Page 17
WARNING ‒ Risk of electric shock!
Improper repairs are dangerous.
▶
Repairs to the appliance should only be carried out
by trained specialist staff.
▶
Only use genuine spare parts when repairing the
appliance.
▶
If the power cord or the appliance power cable of
this appliance is damaged, it must be replaced with
a special power cord or special appliance power
cable, which is available from the manufacturer or
its Customer Service.
15.1 Malfunctions
Fault Cause and troubleshooting
None There has been a power cut.
▶
Check whether the lighting in your room or other appliances are working.
The appliance has not been connected in accordance with the circuit diagram.
▶
Ensure that the appliance has been connected as shown in the circuit diagram.
→
"Establishing the power supply", Page 22
The circuit breaker in the fuse box has tripped.
▶
Check the circuit breaker in the fuse box.
The electronics have detected a fault.
▶
If this fault recurs, call the after-sales service.
The illuminated ring
on the control knob
flashes orange and
white. The appliance has been operating continuously for an extended period. The safety shut-off
has switched the heating process off.
1.
Turn the control knob to 0.
2.
Switch the appliance back on.
The control knob has not been turned for an extended period. The safety shut-off has
switched the heating process off.
1. Turn the control knob to 0.
2.
Switch the appliance back on.
The electronics have overheated and the affected cooking zone has been switched off.
1.
Wait until the electronics have cooled down sufficiently.
2.
Switch on the cooking zone again.
The electronics have overheated and all the cooking zones have been switched off.
1.
Wait until the electronics have cooled down sufficiently.
2.
Switch on the cooking zone again.
Three signal tones
sound. The illumin-
ated ring on the con-
trol knob flashes
three times. The powerBoost function has not been activated correctly.
▶
Activate the powerBoost → Page 11 function.
The appliance has deactivated the powerBoost function to protect the electronic elements
inside the hob.
1.
Turn the control knob to 0.
2. Switch the appliance back on.