Gaggenau VI23212 Series, Руководство пользователя и инструкция по установке, Страница: 22 / 24

en
Installation instructions
22
5.
When installing in a cooking island, ensure that the
appliance is well ventilated.
17.10 Installing the appliance
WARNING ‒ Risk of electric shock!
If the insulation of the power cord is damaged, this is
dangerous.
▶
Never let the power cord come into contact with hot
appliance parts or heat sources.
▶
Never let the power cord come into contact with
sharp points or edges.
▶
Never kink, crush or modify the power cord.
1. Keeping the appliance level, insert it into the unit
cut-out.
2. If the oven is a built-under type, route the mains
connection cable along the rear corners of the oven
to the mains socket.
17.11 Establishing the power supply
1.
Observe the connection data on the rating plate.
2.
Connect the cable to the mains socket in accord-
ance with the figure.
3.
Note the colours of the cables.
– BN: Brown
– BU: Blue
– GN/YE: Green and yellow
17.12 Checking the functionality
1.
Switch on the appliance.
2. Use the operating instructions to check that the ap-
pliance is working.
17.13 Removing the appliance
WARNING ‒ Risk of electric shock!
When disconnecting the appliance from the power sup-
ply, the terminals may cause reverse voltage.
▶
The electrical connection must only be carried out
by licensed specialist staff.
ATTENTION!
Tools may damage the appliance frame.
▶
Do not prise out the appliance from above.
1.
Disconnect the appliance from the power supply.
2.
Push out the appliance from below.