Gaggenau VI 462 103, Инструкция по эксплуатации

Страница: 27 / 36

27
Connecting an extractor hood
en
The connection process may take a few minutes.
The hob is connected to the extractor hood once
˜‘‚
lights up on the control panel and the
illuminated ring on the control knob lights up green.
The
Ö
symbol is displayed on the hob's control
panel.
Exiting the Home Connect settings menu
1 Push in the control knob and turn it anti-clockwise
to the
Ž
position.
2 Turn the control knob clockwise to position
ª
or
¹
.
3 Turn the control knob anti-clockwise to position 0 .
The illuminated ring on the control knob goes out.
Control the hood via the hob
In the Home Connect app, you can adjust the behaviour
of your extractor hood depending on whether the hob or
individual cooking zones are switched on or off.
Switching off Wi-Fi
You can switch off the Wi-Fi on your hob at any time
(e.g. to save energy during a holiday). The connections
to the home network and to the extractor hood remain
saved. When you switch the Wi-Fi back on, the saved
connections are applied.
1 Push in any control knob and turn it anti-clockwise
to the
Ž
position.
2 Turn the control knob clockwise to position
ª
or
¹
.
3 Turn the control knob anti-clockwise to position 0 .
The illuminated ring on the control knob lights up
blue.
4 Turn the control knob clockwise to position 1 .
The illuminated ring on the control knob lights up
green.
Ö
lights up on the control panel. After
five seconds, the Wi-Fi is switched off and the
illuminated ring on the control knob lights up blue.
The
Ö
symbol on the control panel goes out.
If you want to switch the WiFi back on, run through the
same operating sequence. The illuminated ring on the
control knob lights up blue. After 5
seconds, the WiFi is
switched on and the illuminated ring around the control
knob lights up green.
Ö
lights up on the control panel.
Resetting connection
You can reset the connections you have saved for your
home network and extractor hood at any time.
1 Push in any control knob and turn it anti-clockwise
to the
Ž
position.
2 Turn the control knob clockwise to position
ª
or
¹
.
3 Turn the control knob anti-clockwise to position 0 .
The illuminated ring on the control knob lights up
blue.
4 Turn the control knob clockwise to position 2 .
¥“†
lights up on the control panel. After
30 seconds, the connection is reset and the
illuminated ring on the control knob flashes. The
connection is reset once
š‹¯“
lights up on the
control panel and the illuminated ring on the control
knob lights up green.