Gaggenau VG 424, Инструкция по эксплуатации, Страница: 11 / 48

11
Cleaning the electrode
Soiled electrodes may cause malfunctions when igniting
or flame monitor disturbance.
If necessary clean with the included brush. Be careful
when cleaning electrodes, they are fragile, do not twist
or damage.
Do not switch on the cooktop while
cleaning.
Burnt-on dirt
For hard-to-remove, burnt-on dirt, you can order a gel
grill cleaner from your specialist retailer or our after-
sales service (item number 00311761). It is suitable for
pan supports and the stainless-steel recess. If
necessary, let the dirt soak overnight. Follow the
instructions on the cleaning agent.
Caution!
Do not use the gel grill cleaner on the burner parts.
Burner discolouration
After extended use, the brass burner parts take on a
darker colour as a result of the oxidation process that
occurs naturally. The discolouration does not affect
their serviceability.
Appliance part/
surface Recommended cleaning
Stainless-steel
surfaces Use soapy water and dry with a soft
cloth. Only use a minimal amount of
water when cleaning so that no water
enters the appliance.
Soak burnt-on remains with a small
amount of soapy water; do not scour.
Remove heavy soiling or yellow discol-
ouration caused by heat using our stain-
less-steel cleaning agent (item no.
00311499).
Pan supports Carefully remove them for cleaning.
Soak in the sink. Clean using a scrub-
bing brush and detergent.
Clean the area around the rubber buff-
ers carefully so that they do not become
detached.
Rinse with clean water before leaving to
dry.
Do not clean them in the dishwasher.
Burner parts
(brass) Use soapy water and dry with a soft
cloth. Make sure that the openings are
not blocked.
Take care that no small parts are lost.
Do not clean them in the dishwasher.
Control knob The soapy cloth must not be too wet. Dry
with a soft cloth.