15
Operating the appliance
en-us
9
WARNING
Risk of deflagration!
If the burner does not ignite after 15 seconds,
switch off the control knob and open the door or
window in the room. Wait at least 1 minute before
igniting the burner again.
Lighting manually
In the event of a power cut, you can light the burners
manually.
1.
Place a suitable item of cookware on the pan support.
2.
Push in the control knob for your chosen burner and
turn it counterclockwise to the power level you
require. Keep the control knob pressed in.
3.
Light the burner with a gas lighter or a match. Keep
the control knob pressed in for a few seconds after
ignition.
Note:
The indicator on the illuminated ring remains off.
Thermo-electric flame monitoring
For your safety, the stove is equipped with an thermo-
electronic flame monitoring system. It prevents gas from
escaping if the burner mistakenly goes out while in
operation (e.g. through a draft of air).
If the burner mistakenly goes out while in operation, turn
the control knob to the 0 position and wait at least
1 minute before re-igniting the burner.
Turning off
Turn the control knob clockwise to position 0.
9
WARNING
Risk of burns!
When the appliance cover is closed, this leads to a
build-up of heat. Only operate or switch on the
appliance when the appliance cover is open. Do
not use the appliance cover for keeping warm or
setting down. Only close the appliance cover once
the appliance has cooled down.
9
CAUTION
Damage to the appliance
Remove spilled liquids before opening the
appliance cover.
Residual heat display
After switching off the appliance, the illuminated ring on
the control knob slowly flashes orange until the appliance
has cooled enough for it to be safe to touch. Do not
touch the appliance while the residual heat indicator is
flashing.
Содержание VG 231 220 CA
Страница 67: ......