Gaggenau Vario RC289370, Инструкция по применению, Страница: 44 / 56

en
Home Connect
44
10.1 Setting up the
Home Connect app
1.
Install the Home Connect app on
your mobile device.
2.
Start the Home Connect app and
set up access for Home Connect.
The Home Connect app guides
you through the entire login pro-
cess.
10.2 Setting up Home Con-
nect
Requirements
¡
The Home Connect app has been
installed on your mobile device.
¡
The appliance is receiving signals
from the WLAN home network (Wi-
Fi) at its installation location.
1.
Open the Home Connect app and
scan the following QR code.
2.
Follow the instructions in the
Home Connect app.
10.3 Installing updates for the
Home Connect software
The appliance searches for updates
to the Home Connect software at reg-
ular intervals.
Note:
If updates are available, the
temperature display shows .
To reset the update and the temper-
ature display to the set temperature,
press any touch field.
1.
Press .
a
The temperature display shows .
2.
Press repeatedly until the tem-
perature display shows
.
3.
Press .
a
The temperature display shows an
animation.
a The update is installed.
a
The control panel is locked during
the installation.
a
If the installation is successful, the
temperature display shows
.
4.
If the temperature display shows
, the appliance was unable to in-
stall the update.
‒
Repeat the process at a later
point.
5.
If the update cannot be completed
after several attempts, contact cus-
tomer service →
Page 52 .
10.4 Resetting Home Connect
settings
If your appliance experiences con-
nection problems with the WLAN
home network (Wi-Fi) or your appli-
ance wants to log into a different
WLAN home network (Wi-Fi), you can
reset the Home Connect settings.
1.
Press .
a
The temperature display shows .
2.
Press repeatedly until the tem-
perature display shows .