Gaggenau KG491110, Руководство по эксплуатации, техническому обслуживанию и установке

Страница: 24 / 32

Preparing the Cabinet
22
442,50
1,4 m
130
8*
914
510
min. 35
min.
30
885
490
min. 50
190
* 16,5 an den
Luftansaugschlitz
en
min. 87,5
max. 122,5*
(*SV405-011/012:
max.
162,5)
90
60
35
*16.5 at ventilation openings
Note: the appliance can be installed in a base
cabinet with a minimum width of 900 mm. The
recess in the countertop will be slightly wider than
the inner width of the base cabinet.
Do not install the appliance above a drawer.
• Produce the recess for the cooktop in your
countertop. Proceed as indicated on the
installation sketch.
Note: the angle between the cut surface and the
worktop must be 90°.
• As shown in the installation sketch, drill the
Ø 35 mm holes to secure the control knobs in the
cabinet front.
• If the cabinet front is thicker than 26 mm, the front
must be routed from the back to max. 26 mm on
an area of 80 x 470 mm.
16 – 26
min. 5
D > 26
D = 26
80 x
470
min. 5