Gaggenau EB 290-6 series, Инструкция по эксплуатации и сборке

Страница: 30 / 39

End of pyrolysis
After pyrolysis process has ended, an audible
signal sounds and the
the (Cooking time) and
(Pyrolysis) symbols
flash. Press any key and turn the "Temperature"
control knob to the 0 position and the "Modes" knob
to a position other than Pyrolysis. Pay attention to
the fact that the door is not unlocked until at a
temperature of 150 °C /
300 °F or less.
Ending the pyrolysis process before expiry of
the entered time
– Turn the "Temperature" control knob to the 0
position and the "Mode" control knob to a position
other than Pyrolysis.
– Pay attention to the fact that the door is not
unlocked until at a temperature of 150 °C / 300 °F
or less.
Tip: wait until the appliance indicates that the
pyrolysis process has ended. This ensures that you
will achieve an optimum cleaning result.
Note:
during the pyrolysis process, it is not
possible to query the temperature value nor the
time.
Starting pyrolysis at a later time
– Enter the required switch-off time (see
Chapter 3).
– Turn the control knob to the Pyrolysis setting as
described above.
Note: if a switch-off time is programmed, the oven
assumed the maximum pyrolysis time of 3:30 h.
30
In this mode of operation (auto pyrolysis), even
stubborn soiling is burnt away at temperatures
around 485°C.
After the pyrolytic cleaning process, you can
remove the ash easily from the oven using a moist
cloth.