Gaggenau EB 290-6 series, Инструкция по эксплуатации и сборке

Страница: 29 / 39

5.2 Auto pyrolysis (Self-cleaning )
Before you start pyrolytic cleaning
– Remove extreme soiling before the self-cleaning
process.
– Manually clean the door seals, the inside of the
door and the glass pane because the pyrolytic
cleaning process does not clean these parts.
– Important!
Check that the oven door is firmly closed on the
oven.
Proceed as follows
Switching On
– Remove all loose inside parts (e.g. baking trays,
gridiron and core temperature sensor) from the
oven.
There must be no objects left in the
oven compartment!
– Close the oven door.
– Turn the "Temperature" and "Mode" control knobs
by one latching position to the left.
– Press the (Confirm) key to start pyrolysis. An
audible signal is sounded.
– In the display, the (Door lock) and
(Pyrolysis) symbols light up.
For your safety, the oven door is locked immediately.
The
(Door lock) symbol lights up in the display.
The oven lighting goes off and the (Heating)
symbol lights up in the display. The oven starts the
pyrolysis process and, depending on the degree of
soiling, automatically selects the required pyrolysis
time between 2:00 and 3:30 h.
The pyrolysis locking and unlocking process takes
about 30 seconds. The
(Door lock) symbol
lights up during this time.
Do not try to open the oven door during the
self-cleaning process.
29
50
0
Caution!
Very high temperatures occur during the pyrolytic
self-cleaning process.
Observe the appropriate caution and keep
children away.
50
0
Fig. 45
Fig. 46
Fig. 47