Cleaning and maintenance
en
39
Special salt and rinse aid
Top up the salt and/or rinse aid as soon as the refill
indicators on the fascia
P
and
H
are lit or there is a
prompt on the front display *
):
. Always top up the
special salt immediately before switching on the
dishwasher. This ensures that overrun special salt
solution is immediately rinsed out and that corrosion in
the washing tank cannot occur.
* depending on the features of your dishwasher
Filters
The filters
1j
keep large foreign objects in the rinsing
water away from the pump. hese foreign objects may
occasionally block the filters.
The filter system consists of
ʑ
a coarse filter
ʑ
a flat fine filter
ʑ
a microfilter
1.
After each washing cycle check the filters
for residue.
2.
Unscrew filter cylinder as illustrated and take out
filter system.
3.
Remove the micro filter (1).
Press together the locking catches (2) and remove
the coarse filter (3).
4.
Remove any residue and clean filters under running
water.
5.
Re-install filter system in reverse sequence
and ensure that the arrow marks are opposite each
other after closing the filter system.
