Gaggenau DF481700F, Руководство пользователя

Страница: 13 / 48

Options
en-us
13
Cycle Purpose Cycle sequence Usage
1) Hour/min.
2) Electrical/kWH
3) Water/gal
Quick Wash
Dishware:
¡
Cleaning delicate dishware,
silverware, temperature-sen-
sitive plastics and glasses.
Level of soiling:
¡
Removing lightly adhering
fresh food remnants.
Time-optimized:
¡
Cleaning 113 °F
¡
Intermediate rinse
¡
Final rinse 124 °F
¡
1) 0:30
¡
2) 0.400
¡
3) 2.7
Machine Care
Only when using unloaded ap-
pliance.
Machine Care 162 °F
¡
1) 2:00
¡
2) 1.100
¡
3) 2.5
Personalization
function
- -
¡
1) 0:09 - 0:09
¡
2) 0.050 - 0.050
¡
3) 1.2 - 1.2
6.1 Energy Guide
The Energy Guide label was based on the Normal soil
sensing cycle.
The unit was tested without any rinse aid (liquid) in the
rinse aid dispenser. A single dose of detergent was in-
serted into the detergent dispenser, with no detergent be-
ing used in the prewash. The unit was not subjected to
truncated testing per the definitions in the test procedure.
We recommend that dish loads such as the one in the en-
ergy certification test have the rack position set in the
highest position. Recommended for daily, regular or typi-
cal use to completely wash a full load of normally soiled
dishes.
6.2 Personalization function
With this function, you can save a combination of a Cycle
and an Option.
You can save the selected Cycle and Option combination
via the Home Connect app or on the appliance.
The pre-rinse cycle is pre-programmed to this button and
is fine for all types of dishware. The dishware is rinsed
with cold water.
Tip: You can use the Home Connect app to download ad-
ditional Cycles and Options and save them. 1
Save Personalization function on the appliance.
1.
Press ⁠.
2.
Press the right cycle button.
3.
Press the button for the relevant options.
4.
Press Personalization Function button for 3 seconds.
a
The selected cycle and option will flash.
a
The Personalization Function button flashes.
a
The program combination is saved.
Tip: To reset the cycle, either use the Home Connect app
or reset your appliance back to the factory settings.
→
"Overview of the basic settings", Page 29
Options 7 Options
Options
You can find an overview of the options that can be se-
lected here. Different options, which can be found on the
control panel of your appliance, are available depending
on the appliance configuration.
Option Use
Extra Dry with Ze-
olite
Patented technology thoroughly
dries dishes and plastics such as
baby bottles and food storage con-
tainers. Natural minerals transform
moisture into heat up to 176F/80C to
get dishes, even plastics, 60% drier.
Extends drying time.
Sanitize
¡
To ensure a higher hygiene status
for the appliance and dishware,
the temperature is increased and
maintained for an extra-long pe-
riod.
¡
Especially suitable for cleaning
chopping boards or baby bottles.
¡
Continuous use of this option im-
proves the hygiene status.
¡
This will increase the run time and
energy consumption.
Intensive
¡
Switch on with mixed loads con-
taining dishware with different
soiling levels, e.g. place very
soiled pots and pans in the lower
rack and normally soiled dishware
in the upper rack.
¡
The spray pressure in the lower
rack is increased and the maxi-
mum program temperature held
longer. This will increase the run
time and energy consumption.
Power
¡
The run time is shortened by 15%
to 75% depending on the wash
cycle.
¡
An option can be added to the cy-
cle before it starts or at any time
when the cycle is running.
1
Depending on the appliance specifications