Gaggenau DF481500F, Руководство пользователя

Страница: 57 / 72

Troubleshooting
aus
57
Fault Cause and troubleshooting
Detergent residue in
the appliance
▶
Select a more intensive Programme or use Powder
detergent.
Washing effect and dissolving performance are re-
duced after a prolonged storage time or detergent is
very lumpy.
▶
Change your detergent → Page 34 .
Water marks on
plastic parts. Due to laws of physics droplet formation on plastic
surfaces is unavoidable. After drying water marks are
visible.
▶
Select a more intensive programme.
▶
Position tableware at an angle.
→
"Arrange tableware", Page 38
▶
Use rinse aid.
→
"Rinse aid", Page 33
Wipeable or water-sol-
uble coatings are
present inside the ap-
pliance or on the
door. Detergent substances are deposited there. These
coatings cannot generally be removed with chemicals.
▶
Change your detergent → Page 34 .
▶
Clean the appliance mechanically.
Stubborn white coat-
ings are present on
tableware, inside the
appliance or the door. Detergent substances are deposited there. These
coatings cannot generally be removed with chemicals.
▶
Change your detergent → Page 34 .
▶
Clean the appliance mechanically.
Too little detergent is being used.
▶
Increase the amount of detergent used or change
Detergent →
Page 34 .
Washing programme selected too weak.
▶
Select a more intensive washing programme.
▶
Adjust the sensitivity of the sensors.
→
"Sensors", Page 12
Tea residue or lipstick
marks on tableware. Washing temperature is too low.
▶
Select a programme with a higher washing temper-
ature.
Too little detergent is being used or is unsuitable.
▶
Use a suitable Detergent → Page 34 and follow the
manufacturer's instructions for the amount to be
used.
Tableware has been precleaned too intensely. The
sensors chose a weaker programme. Stubborn soiling
cannot be entirely removed.