Gaggenau DF480161CN, Инструкция по эксплуатации

Страница: 32 / 48

en
Cleaning and maintenance
32
Cleaning and maintenance
Cleaning and maintenance
A regular inspection and maintenance of your machine
will help to prevent faults. This saves time and prevents
problems.
Overall condition of the machine
▯
Check rinsing compartment for grease and limescale
deposits.
If you find such deposits:
▯
Fill detergent dispenser
9:
with detergent. Start
the appliance without utensils in the programme with
the highest rinsing temperature.
:
Warning – Health hazard due to detergents
containing chlorine!
Always use chlorine-free detergents.
Clean the appliance with detergents/appliance cleaners
which are particularly suitable for use with dishwashers.
▯
To extend the life of your appliance, clean the
appliance regularly with a special dishwasher
detergent.
▯
To ensure that the door seal always remains clean
and hygienic, regularly clean it with a damp cloth and
a little washing-up liquid.
▯
If the appliance is switched off for a prolonged
period, leave the door ajar to prevent the formation of
an unpleasant odour.
Never use a steam cleaner to clean your dishwasher.
The manufacturer is not liable for any consequential
damage.
Regularly wipe the front of the appliance and fascia with
a damp cloth; water and a little washing up liquid
are adequate. Do not use sponges with a rough surface
or abrasive detergents, as these could scratch
the surfaces.
Stainless steel appliances: To prevent corrosion, avoid
using sponge cloths or wash them out thoroughly
several times before using for the first time.
Special salt and rinse aid
Top up the salt and/or rinse aid as soon as the refill
indicators on the fascia
P
and
H
are lit or there is a
prompt on the front display *
):
.
* depending on the features of your dishwasher
Filters
The filters
1j
keep large foreign objects in the rinsing
water away from the pump. hese foreign objects may
occasionally block the filters.
The filter system consists of
▯
a coarse filter
▯
a flat fine filter
▯
a microfilter
1.
After each washing cycle check the filters
for residue.
2.
Unscrew filter cylinder as illustrated and take out
filter system.
3.
Remove any residue and clean filters under running
water.
4.
Re-install filter system in reverse sequence
and ensure that the arrow marks are opposite each
other after closing the filter system.