Fault, what to do?
en
33
Spray arms
Limescale and contaminants in the rinsing water may
block nozzles and bearings on the spray arms
1:
and
1Z
.
1.
Check outlet nozzles on the spray arms
for blockages.
2.
Unscrew the upper spray arm
1:
(1) and remove
downwards (2).
3.
Remove the lower spray arm
1Z
upwards.
4.
Clean spray arms under running water.
5.
Re-engage or screw on spray arms.
Fault, what to do?
Fault, what to do?
Experience has shown that you can rectify most faults
which occur in daily operation yourself. This ensures
that the appliance is quickly available to you again. In
the following overview you can find possible causes of
malfunctions and helpful information for rectifying them.
Note:
If the appliance stops during dishwashing or does
not start for no obvious reason, first run the Abort
programme function (Reset) .
:
Warning – Improper repairs or use of non-original
spare parts may cause considerable damage and put
the user at considerable risk!
Always have repairs carried out by technicians. If a
component has to be replaced, always use original
spare parts.
Error message
Some faults are indicated at the top of the display
window
@
and on the front display *
):
and possible
remedies are offered (for example Filter system soiled
(E22) -->Clean filters).
* depending on the features of your dishwasher
Содержание DF480161
Страница 1: ...DJJHQDX Instruction manual Dishwasher DF480161 DF481161...
Страница 2: ...08 HPX h 2 1 1 121 1B1J1R1Z1b1j9 9 929 9B9J 5HVHW VHF 6HWXS VHF...
Страница 47: ...6...