Gaggenau DF250560, Руководство пользователя

Страница: 10 / 38

aus
Getting to know your appliance
10
Info button
{
Info button
The Info button
{
can be used to display additional
programme information.
1.
Press the Info button
{ 8
.
2.
Press the programme button.
Information on the selected programme is indicated
on the display window at the top
@
.
3.
To leave, press Info button
{ 8
.
Time setting
Time setting
When the appliance is switched on the for the first
time, the time starts at 12:00 o’clock.
Set the time as follows:
1.
Open the door.
2.
Switch on ON/OFF switch
(
.
3.
Press Info button
{ 8
for 3 seconds until the
following text is indicated on the display window at
the top
@
:
Scroll with < >
Set with - +
Leave with Setup 3 sec.
4.
Keep pressing button >
)"
until the time setting is
indicated on the display window at the top
@
.
5.
Make the setting with setting buttons + -
P
. If the
selection buttons + -
P
are held down, the set
values are changed in 10-minute steps.
6.
Press and hold the Info button
{8
for 3 seconds.
The chosen setting has now been stored.
Note: If the appliance was disconnected from the power
supply for a prolonged period, the time starts at 12:00
o’clock. Set the time.
Switching on the appliance for the first time
When the dishwasher is switched on for the first time,
you are taken directly to the settings for switching on
the appliance for the first time. The following text is
indicated on the display window at the top
@
:
Scroll with < >
Set with - +
Leave with Setup 3 sec.
The required settings for switching on the appliance for
the first time are listed in the table below.
Change the setting as follows:
1.
Keep pressing button >
)"
until the required setting
is displayed.
2.
Make the setting with setting buttons + -
P
.
3.
Press and hold the Info button
{8
for 3 seconds.
The chosen setting has now been stored.
--------
Settings
Switching on the appliance for
the first time Factory setting Infotext
by pressing Info button
{
Language English Language selection.
Time format 24h 12h or 24h.
Time setting 12:00 Set the current time.
Rinse aid disp. Setting 5 Amount of rinse aid affects drying. When
using Multitabs, select setting 0.
Water connection * Cold water Connection to hot water (40-60°C) or cold
water (<40°C) possible.
* depending on the features of your dishwasher