Gaggenau DF250141, Руководство по эксплуатации

Страница: 23 / 34

23
Fault, what to do?
Fault, what to do?
Experience has shown that you can rectify most faults
which occur in daily operation yourself. This ensures
that the machine is quickly available to you again. In
the following overview you can find possible causes
of malfunctions and helpful information for rectifying
them.
Note
If the appliance stops during dishwashing or does not
start for no obvious reason, first run the Abort
programme function (Reset).
(See chapter entitled “Operating the appliance”)
m
Warning
Don’t forget: Repairs may be carried out by
technicians only. If a component has to be replaced,
ensure that only original spare parts are used.
Improper repairs or use of non-original spare parts
may cause considerable damage and put the user at
considerable risk.
Waste water pump
Large food remnants or foreign objects which were
not captured by the filters may block the waste water
pump. The rinsing water will then be above the filter.
m
Warning
Risk of cuts!
When cleaning the waste water pump, ensure that you
do not injure yourself on pieces of broken glass
or pointed implements.
In this case:
1 First always disconnect the appliance from
the power supply.
2 Take out top basket
12
and bottom basket
9*
.
3
Remove the filters
1j
.
4
Scoop out water, use a sponge if required.
5
Prise out the white pump cover (as illustrated)
using a spoon. Grip the cover on the crosspiece
and lift diagonally inwards. Remove cover
completely.
6 Check impeller wheel and remove any foreign
objects.
7 Place cover in the original position and press
down until it engages (click).
8 Install filters.
9
Re-insert baskets.
&/,&.