Gaggenau CV282110, Инструкция по эксплуатации

Страница: 22 / 52

22
en
Professional chef function
Professional chef function
Professional chef function
You can use the professional chef function to display
the preset heat settings for each hotplate. Set down a
suitable item of cookware within 8 minutes to apply the
default value.
Activation
1 Switch on the hob.
2 Touch the
¬
symbol.
The preset heat settings will light up on the hotplate
displays. The flexible cooking zones on the left-
hand side are linked.
3 Set down a suitable item of cookware within
8 minutes. Once the cookware has been detected,
the corresponding hotplate will be selected. You
can adjust the heat setting using the twist knob.
The heat setting indicators for the unoccupied
hotplates will start flashing if the adjustment time
has elapsed.
4 Touch the
¬
symbol again within 90 seconds to
extend the professional chef function. If you do not
touch the symbol, the hotplates you are not using
will switch themselves off.
Notes
– Only the keep-warm function and the flex function
can be set in professional chef mode.
– If an unsuitable item of cookware is set down (e.g.
aluminium cookware), the heat setting indicator will
flash until this cookware is removed. To check
whether your cookware is suitable for induction
cooking, refer to the section entitled
~
"Cookware
test"
.
Deactivating
To end the function immediately: Touch the
¬
symbol.
Switch all hotplates to heat setting
‹
. The
¬
symbol
lights up white.
Function ends automatically: If no suitable cookware
is set down after 8 minutes have elapsed, the
¬
symbol
and the corresponding hotplate displays start flashing
for 90
seconds. Touch the
¬
symbol twice to switch off
the function.
If you do not touch the
¬
symbol, the professional chef
function switches off automatically after 90 seconds.
The
¬
symbol lights up white and unoccupied hotplates
switch to heat setting
‹
. Hotplates that are in use retain
the original heat setting.
Changing the settings
You can change the default settings in the "Basic
settings" menu. See the section entitled
~
"Basic
settings"