Gaggenau CV282110, Инструкция по эксплуатации

Страница: 16 / 52

16
en
Operating the appliance
Switching off the hotplate
Select the hotplate and turn the twist knob until
‹
appears. The hotplate switches itself off and the
residual heat indicator lights up.
Notes
– If no pan has been placed on the hotplate, the
selected power level flashes. After a certain time
has elapsed, the hotplate switches off.
– If there is cookware on the hotplate before
switching the hob on, this is detected at most
20 seconds after touching the main switch and the
hotplate is selected automatically. Set the heat
setting within the next 10 seconds. Otherwise the
hotplate will switch itself off again after
20 seconds.
Even if there are several pots and pans on the hob
when it is switched on, only one item of cookware is
detected.
– The ventilation system must be switched off
separately.
~
"Switching off the ventilation
system" on page 16
Switching the ventilation system on
and off
Note: Always adjust the setting according to the current
conditions. To eliminate strong cooking smells, select a
high fan setting.
Note: If no metal grease filter is available, the
ventilation system cannot be switched on. Insert the
metal grease filter. The hob functions are also available
if there is no metal grease filter.
~
"Cleaning"
on page 41
Note: Using tall items of cookware may prevent the
extraction system from working at optimum power. The
extraction power can be improved by placing a lid on the
cookware at an angle.
Note: Do not obstruct the ventilation openings. Do not
place objects on the filter cover, as this will reduce the
power of the ventilation system.
Switching on the ventilation system
Note: If
” ‚¯†“ ¥£
flashes on the display panel and
}
symbol is not available, insert the metal grease filters
correctly.
}
is shown on the display panel. The ventilation system
can be switched on.
1 Touch the
}
symbol.
The
}
symbol will be lit orange. The ventilation
system will start at fan setting
ƒ
. The fan setting
that is selected will be shown on the display panel.
Notes
–
Heat settings cannot be changed while the
ventilation system fan settings are being
configured.
–
During a period of a few seconds, a fan setting
for the ventilation system can be selected. The
}
symbol will be lit white when the Twist knob
can be used to configure the heat settings again.
2 Use the twist knob to select the required setting.
The fan setting that is selected will be shown on the
display panel.
3 To set a different fan setting, touch the
}
symbol
and use the twist knob to select the required
setting.
The fan setting that is selected will be shown on the
display panel.
Switching off the ventilation system
If you want to switch off the appliance, touch the
#
symbol. If you only want to switch off the ventilation
system, proceed as follows:
1 Touch the
}
symbol.
2 Use the twist knob to select the fan setting
‹
.
3 Touch the
}
symbol to switch to the setting area
for the hob.
Note: If the run-on has been switched on, you can only
switch the ventilation system off via the twist knob.
~
"Run-on function" on page 17
Intensive setting
Activate intensive mode if strong odours or large
amounts of steam are produced. In this mode, the
ventilation system briefly operates at maximum power. It
automatically switches back to a low setting after a
short time.