Gaggenau CV282110, Инструкция по эксплуатации

Страница: 41 / 52

41
Cleaning
en
D
Cleaning
Cleaning
m
Warning – Risk of burns!
The appliance becomes hot during operation. Allow the
appliance to cool down before cleaning.
m
Warning – Risk of burns!
The appliance will become hot during operation. If hot
liquids penetrate the appliance, leave the appliance to
cool for at least two hours before removing the filter
cover, the metal grease filter, the container, the overflow
reservoir or the appliance housing.
m
Warning – Risk of electric shock!
Do not use any high-pressure cleaners or steam
cleaners, which can result in an electric shock.
m
Warning – Risk of electric shock!
Penetrating moisture may result in an electric shock.
Clean the appliance using a damp cloth only. Before
cleaning, pull out the mains plug or switch off the circuit
breaker in the fuse box.
m
Warning – Risk of injury!
Components inside the appliance may have sharp
edges. Wear protective gloves.
Note: Only use a minimal amount of water when
cleaning so that no water enters the appliance.
Notes
– Before cleaning the appliance, remove any jewellery
you are wearing on your arms and hands.
– Do not use any cleaning agents while the hob is still
hot. This may mark the surface. Ensure that any
residue left by cleaning agents is removed.
Cleaning agents
Only use cleaning products that are suitable for this
type of hob. Follow the manufacturer's instructions on
the product packaging.
Follow all instructions and warnings included with the
cleaning products.
Suitable maintenance and cleaning products can be
purchased from the after-sales service or in our e-Shop.
Caution!
Beware of causing surface damage
Do not use:
– Undiluted washing-up liquid
– Cleaning products designed for dishwashers
– Abrasive cleaning products
– Pressure washers or steam jet cleaners
– Oven cleaners
– Corrosive or aggressive cleaners, or those
containing chlorine
– Cleaners containing a large percentage of alcohol
– Hard, scratchy sponges, brushes or scouring pads
Caution!
Beware of causing surface damage
Always wash new sponge cloths thoroughly before use.
To ensure that the different surfaces are not damaged
by using the wrong cleaning product, follow the
instructions in the table.
Area Cleaning product
Glass ceramic Glass cleaner for stains caused by
limescale and residual water:
Clean the hob as soon as it has cooled
down. You can use a cleaning product
that is suitable for glass-ceramic hobs or
glass cleaner (article no. 00311499).
Glass scraper (article no. 00087670) for
stains caused by sugar, rice starch or
plastic:
Clean immediately. Caution: Risk of
burns.
Then clean with a damp dish cloth and
then dry with a cloth or towel.
Note:
Do not use cleaning products designed
for dishwashers.
Stainless steel Hot soapy water:
Clean with a dish cloth and then dry with
a soft cloth.
Use a minimal amount of water when
cleaning to prevent water from penetrat-
ing the appliance.
Leave dried-on remnants to soak in a
small amount of soapy water; do not
scour.
Always clean stainless steel surfaces in
the direction of the grain.
Special stainless steel cleaning prod-
ucts (article no. 00311499) are available
from our after-sales service, through our
online shop or from specialist retailers.
Apply a very thin layer of the cleaning
product with a soft cloth.
Note:
Do not use a glass scraper to clean the
hob surround.
Plastic Hot soapy water:
Clean with a soft cloth or in the dish-
washer.
Controls Hot soapy water or an appropriate glass
cleaner (article no. 00311499):
Clean using a damp dish cloth and then
dry with a soft cloth.
Filter cover Hot soapy water:
Clean using a damp dish cloth and then
dry with a soft cloth.