11
Water filter
en
Setting the water hardness
It is important to set the water hardness correctly so
that the appliance indicates in good time when the
descaling programme should be run. The preset water
hardness is level 4. If a water softening unit is installed
in the household, select the "Softening device" setting.
You can check the water hardness using the enclosed
test strip or by asking your local water supplier.
1
Briefly immerse the enclosed test strip in fresh tap
water, leave it to drip and read off the result after
one minute.
2
Rotate the function selector to
S
.
3
Use the rotary selector to select "Basic settings"
and touch the
™
symbol.
4
Use the rotary selector to select "Water hardness".
5
Touch the
%
symbol.
6
Using the rotary selector, set the measured water
hardness.
7
Press
™
to confirm.
The setting has been saved. Touch
'
to exit the basic
settings.
Water filter
Water filter
Operation with or without a water
filter
You can use the appliance with or without a water filter.
To ensure that the descaling display of the appliance
functions correctly, you must specify in the basic
settings whether a water filter is used.
1
Rotate the function selector to
S
.
2
Select "Basic settings" using the rotary selector.
3
Touch the
™
symbol.
4
Select "Water filter" using the rotary selector.
5
Touch the
%
symbol.
6
Use the rotary selector to select either "Available"
(with water filter) or "Not available" (without water
filter).
7
Press
™
to confirm.
The rinse program starts with the "Available"
setting. Proceed according to the information on
the display.
8
Touch the
'
symbol to leave the Basic settings
menu.
