Gaggenau CM470111, Инструкция по эксплуатации

Страница: 16 / 32

16
en
Preparing beverages
To prepare a drink:
The appliance must be switched on. The bean container
must be filled.
1 Rotate function selector to position 2.
2 Using the rotary selector, select a coffee beverage
with milk. To select a beverage made with ground
coffee, you must first fill the ground coffee drawer.
3 Place a cup or glass under the coffee dispenser.
4 Press
I
to start.
- or -
Touch the
C
symbol first, then set the size or
strength for example, using the rotary selector.
Confirm with
™
.
The milk is drawn in and prepared and then the coffee is
brewed.
Notes
– While the beverage is dispensed, the
&
symbol is
displayed. Touch this symbol to stop the beverage
being prepared.
– Using the
‡
symbol, you can save the current
beverage: Touch the
‡
symbol, turn the function
selector to a free memory location and save the
entry.
~
"Individual beverages" on page 17
– Dried-on milk residues are difficult to remove, so
always clean the milk system after every use.
~
"Cleaning the milk system" on page 23
Preparing milk froth and warm milk
m
Warning – Risk of burns!
The milk system becomes very hot. After use, allow it to
cool down first before touching it.
To prepare a drink:
The appliance must be switched on.
1 Rotate the function selector to position 2.
2 Connect the milk hose.
~
"Preparing a coffee with
milk" on page 15
3 Select "Milk froth" or "Warm milk" with the rotary
selector.
4 Place a cup or glass under the coffee dispenser.
5 Touch the
C
symbol.
6 Set the size using the rotary selector.
7 Press
™
to confirm the settings.
8 Press
I
to start.
The milk is drawn in and then flows into the cup or
glass.
Notes
– While the beverage is dispensed, the
&
symbol is
displayed. Touch this symbol to stop the beverage
being prepared.
– Using the
‡
symbol, you can save the current
beverage: Touch the
‡
symbol, turn the function
selector to a free memory location and save the
entry.
~
"Individual beverages" on page 17
– Dried-on milk residues are difficult to remove, so
always clean the milk system after every use.
~
"Cleaning the milk system" on page 23
Preparing hot water
m
Warning – Risk of burns!
The milk system becomes very hot. After use, allow it to
cool down first before touching it.
The appliance must be switched on.
1 Remove the milk tube from the milk container.
2 Rotate function selector to position 2.
3 Select "Hot water" using the rotary selector.
4 Place a cup or glass under the coffee dispenser.
5 Touch the
C
symbol.
6 Set the size using the rotary selector.
7 Touch the
C
symbol.
8 Set the temperature using the rotary selector.
9 Confirm with
™
.
10 Press
I
to start.
The water is heated and then flows into the cup or glass.
Notes
– While the beverage is dispensed, the
&
symbol is
displayed. Touch this symbol to stop the beverage
being prepared.
– Using the
‡
symbol, you can save the current
beverage: Touch the
‡
symbol, turn the function
selector to a free memory location and save the
entry.
~
"Individual beverages" on page 17