![Gaggenau CM 470711 Скачать руководство пользователя страница 13](http://html1.mh-extra.com/html/gaggenau/cm-470711/cm-470711_use-and-care-manual_3175368013.webp)
13
Switching the appliance on and off
en-us
Switching the appliance on and off
Switching the appliance on and off
Main switch
The main switch is used to switch the appliance on and
off.
If the appliance is switched off at the main switch, the
power supply is interrupted.
The appliance is programmed so that it switches to
"Standby" mode automatically after about 30 minutes.
This timespan can be changed.
The appliance rinses automatically when it is switched on
at the main switch. Exception: The appliance was only
switched off a few minutes beforehand.
Notes
▯
Do not press the main switch during operation. If you
want to manually switch off the appliance, you must
first set the function selector to
0
so that it rinses
automatically. Then switch off the appliance using the
main switch.
▯
The appliance is equipped with a sensor. If a milk
container is present, this will be correspondingly
shown on the display when switching to the energy
saving mode (function selector set to
0
). If there is
milk in the container, please keep in the refrigerator.
Sleep mode
The appliance goes into sleep mode if the function
selector is turned to
0
or if the child lock is activated.
The brightness of the display is dimmed in sleep mode
during the first few minutes.
Then the display switches itself off.
Notes
▯
In the general settings, you can set whether the
Gaggenau logo is to be displayed during sleep mode.
▯
The brightness of the display depends on the vertical
viewing angle. You can adjust the display using the
"Brightness" setting in the general settings.
Activating the appliance
In order to leave sleep mode, or to activate the display
when it has been switched off, turn the function selector.
Now you can set the desired function. Read the
appropriate chapters to learn how to set functions.
Note:
If the drip tray is not in place, the appliance cannot
be switched on and no water flows out of the beverage
dispenser.
The message "Insert trays" appears.