Gaggenau CI 292 601, Инструкция по использованию и уходу

Страница: 18 / 60

18
en-us
Operating the appliance
Setting an element
Set the required element using the twist knob.
Heat setting 1 = lowest setting.
Heat setting 9 = highest setting.
Every heat setting has an intermediate setting. This is
shown in the element display as
.5 .
Notes
▯
To protect the fragile parts of your appliance from
overheating and electrical overloading, the cooktop
may temporarily reduce the power automatically.
▯
In order to prevent the appliance from producing
excess noise, the cooktop may temporarily reduce the
power automatically.
Selecting a cooking position and power level
The cooktop must be switched on.
1.
Select the element. To do this, touch the twist knob in
the appropriate area for the required element.
2.
Within the next 10 seconds, turn the twist knob until
the required heat setting appears in the heat setting
display.
The power level is set.
Notes
▯
When placing an item of cookware on the flexible
cooking zone, it must be positioned correctly
according to size, see section
~
"Flex function"
.
The cookware is detected and the element is selected
automatically. You can change the settings.
▯
If the indicators flash after you have changed the
settings, check whether the cookware is suitable for
induction cooking. See section
~
"Cookware Test"
Changing the heat setting
Select the element and change the heat setting using the
twist knob.
Switching off the element
Select the element and turn the twist knob until
‹
appears. The element switches itself off and the residual
heat indicator lights up.
Notes
▯
If there is no cookware on the induction element, the
heat setting display flashes. After a while, the element
will switch itself off.
▯
If there is cookware on the element before switching
the cooktop on, this is detected at most 20 seconds
after touching the main switch and the element is
selected automatically. Set the heating setting within
10 seconds. Otherwise, the element switches off
again after 20 seconds.
Even if there are several pots and pans on the cooktop
when it is switched on, only one item of cookware is
detected.
Z Z