12
Kitchen timer
You can use the kitchen timer to set a time of up to 99
minutes. It runs independently of all the other settings.
Switching on the kitchen timer
You can switch the kitchen timer on in 2 different ways:
▯
If a hotplate has been selected, touch the symbol
M
twice within 10 seconds.
▯
If a hotplate has not been selected, touch the
M
symbol.
The
V
indicator lights up.
Setting the kitchen timer
Set the required time in the settings range.
When the time has elapsed
After the time has elapsed, you will hear an audible
signal.
‹‹
lights up in the timer indicator. The indicator
V
for the kitchen timer lights up brightly. The indicator
switches off after 10 seconds.
Displaying the time
Use the
M
symbol to select the kitchen timer. The time
is displayed for 10 seconds.
Setting the correct time
Use the
M
symbol to select the kitchen timer and reset
the time.
Safety shut-off
If a hotplate is switched on for a long time without the
setting being changed, the automatic safety shut-off is
activated.
The hotplate stops heating.
”‰
and the
•
/
œ
residual
heat indicator flash alternately on the hotplate indicator.
The indicator goes out when you touch any control. You
can implement new settings.
The point at which the safety shut-off becomes active (1
to 10 hours) depends on which heat setting has been
set.
Wipe protection
If you wipe over the control panel while the cooktop is
switched on, settings may be altered.
To prevent this from happening, your cooktop has a wipe
protection function. Touch the
−
symbol. An audible
signal sounds. The indicator light above the
−
symbol
lights up. The control panel is locked for 30 seconds.
You can now wipe over the control panel without altering
any settings.
Note:
The main switch is excluded from the wipe
protection function. You can switch off the cooktop at
any time.
