Gaggenau BMP 251, Инструкция по эксплуатации

Страница: 23 / 44

22
Deleting recipes
1 Set the function selector to a desired type of
heating.
The
i symbol is displayed.
2 Touch the i symbol. Select "Individual recipes"
using the rotary selector.
3 Confirm with ™ .
4 Use the rotary selector to select the desired recipe.
5 Delete the recipe with Ž .
6 Confirm with ™ .
Timer functions
You use the timer menu to make the following settings:
Š
Short-term timer
p Stopwatch
Calling up the timer menu
The appliance must be on and the function selector
must be at 0 or
ž .
Touch the
M
symbol.
The timer menu is displayed.
Notes
‒ If you turn the function selector to a heating
function or S "Basic settings" while the timer or the
stopwatch are running, a message will appear in the
display. Confirm the message by pressing the
™
symbol, and pause the timer or stopwatch. The
appliance is ready for operation.
To continue operating the timer or stopwatch, turn
the function selector back to the zero setting 0
or
ž "Light".
‒ The timer and the stopwatch can be operated at the
same time.
When the function selector is at the zero setting 0,
only the timer is displayed.
In the
ž "Light" setting, the timer and stopwatch
are displayed.
23
Timer
The timer only runs if no other function is set. You can
enter a maximum of 90 minutes.
Setting the timer
1 Call up timer menu.
The "Timer"
Š
function is displayed.
2 Turn the rotary selector to set the required cooking
time.
3 Start with
I
.
The timer menu closes and the time begins to count
down. The
Š
symbol and the countdown appear in the
display.
A signal sounds once the time has elapsed. Touch the
™ symbol to silence.
You can exit the timer menu at any time by pressing the
' symbol. This erases the settings.
To stop the timer:
Call up timer menu. Touch
C
to select the "Timer"
Š
function and touch the
H
symbol. To allow the timer to
continue counting down, touch the symbol
I
.
Switching off the timer early:
Call up timer menu. Touch
C
to select the "Timer"
Š
function and touch the Ž symbol.
Stopwatch
The stopwatch only runs if no other function is set.
The stopwatch counts from 0 seconds up to 90 minutes.
It also has a pause function, which enables you to
temporarily stop the clock.
Starting the stopwatch
1 Call up the timer menu.
2 Touch
C
to select the p "Stopwatch" function.
3 Touch
I
to start.
The timer menu is closed and the timing begins. The p
symbol and the elapsed time are shown in the display.
Pausing and restarting the stopwatch
1 Call up the timer menu.
2 Touch
C
to select the p "Stopwatch" function.
3 Touch the
H
symbol.
The time stops. The symbol changes to
I
Start.
4 Touch
I
to start.
The time continues to run. When 90 minutes is reached,
the display pulsates and signal sounds. The signal stops
when you touch the
™ symbol. The p symbol on the
display goes out. The process has finished.
To switch off the stopwatch:
Call up the timer menu. Touch
C
to select the p
"Stopwatch" function and touch the
Ž
symbol.
7LPHU
6WRSZDWFK
6WRSZDWFK