12
RISK OF INJURY
Suitable cleaning agents and care products for your
appliance can be purchased via the Hotline or from
the Online Shop (see cover page).
Appliance surfaces
Note: Observe the warranty regulations in the
enclosed service booklet.
•
The appliance surfaces and controls are
scratch-sensitive. Therefore observe the
following cleaning instructions:
–
Avoid cleaning the extractor hood with dry
cloths, abrasive sponges, scouring agents,
cleaning agents containing sand, soda, acid,
chlorine or any other aggressive substances.
–
Clean the appliance surfaces and controls with
a soft, damp cloth, washing-up liquid or a mild
window cleaner only.
–
Do not scrape off dried dirt, but moisten with a
damp cloth.
–
Clean carefully in the area of the controls to
avoid liquid from getting into the electronics.
Note: Clean the stainless steel surfaces in the
direction of the ground surface only!
Do not use stainless steel cleaner for the control
buttons!
Looking after the appliance
•
Suitable cleaning agents and care products for
your appliance can be purchased via the
Hotline or from the Online Shop (see cover
page).
Metal-mesh grease filters
•
The metal-mesh grease filters absorb the
grease particles from the kitchen fumes.
•
The filter mats consist of fire-proof metal.
RISK OF FIRE
As the filters become more saturated with greasy
residue, the flammability increases. The function of
the extractor hood may also be impaired.
•
The risk of fire is prevented by cleaning the
metal-mesh grease filters in good time.
•
When cleaning the grease filters, also remove
grease deposits from the accessible parts of
the housing with a damp cloth.
Cleaning the metal-mesh grease filters ...
•
Under normal operation (daily 1 to 2 hours), the
metal-mesh grease filters must be cleaned 1x
month.
... in the dishwasher
•
The metal-mesh grease filters can be cleaned in
the dishwasher. Slight discolouration may
occur but this will not affect the function of the
grease filters.
•
The filters must be placed loosely in the
dishwasher. They must not be wedged in.
Note: Do not clean heavily saturated metal-mesh
grease filters together with utensils.
... by hand
•
When cleaning by hand, soak the grease filters
in a hot detergent solution, brush off the dirt,
rinse thoroughly and leave to dry.
•
Do not use any aggressive, acidic or alkaline
cleaning agents.
•
If dirt is particularly stubborn, we recommend
using a special grease solvent spray. This can
be ordered via the Online Shop.
Cleaning and care
