5.
Hang the support frame with the two key-holes
to the two screws in the ceiling and attach it
with all 4 screws to the ceiling. The marking
“FRONT” must be on the same side as the
control panel after installation.
Circulating air mode only
:
assemble the
circulating air switch module and fix it to
support frame (Fig. 22 and 23). Cut the flexible
air pipe to the required length and fix it to the
extractor hood.
6.
Remove the cover plate from the rear of the
support frame (Fig. 24).
16
Fig. 22
Fig. 23
Fig. 24
