Installation instructions
en
29
2.
Open the filter cover.
‒
Grasp the front corners of the filter cover and
pull it down in a single, swift motion.
3.
Undo the hinge lock and remove the filter cover.
4.
Remove the grease filters.
To avoid causing damage, do not bend the grease
filters.
5.
Undo the control panel cabling and cabling for the
lighting.
6.
Undo the screws in the frame and remove the
frame .
Installing the appliance
1.
Insert the appliance into the opening in the fitted
unit and screw it to the fitted unit .
2.
Tighten the fastening screws.
3.
Attach the frame and screw it to the appliance from
below.
4.
Secure the frame and the appliance with screws.
If the screws are not accessible from the exterior,
the screws can also be fitted from the interior.
