4
12/21 REV 8/22
GB704SH
-
5 PNEUDRAULIC INSTALLATION TOOL.
.
SPECIFICATIONS
Hand Held Weight
-
2.00 lbs. (.90 kg)
Air pressure req'd
-
90
-
100 psi. (6.2
-
6.7 bar)
Air consumption
-
.30 SCF/cycle (8.50 L/cycle)
Hydraulic oil
-
Automatic Transmission Oil,
Dexron® III, or equivalent.
Setting stroke
-
.600"
(15.24 mm)
Noise level
-
Less than 81.5 dB(A)
Rated pull load
-
3,300 lbs. (14.68 kN)
Vibration
-
Tested–
No Hazards Found
DESCRIPTION
WARNING
:
Any other use is forbidden.
The GB704SH
-
5 can be operated between 0ºF
-
118º (
-
17.8ºC / 47.8ºC)
ENVIRONMENTAL USE
WARNING
:
Do not operate in an explosive atmosphere.
The GB704SH
-
5 series are pneumatic
-
hydraulic installation tools designed specifically for the efficient installation of blind fasteners.
They can be operated in any position. They have a rated pull load of 3,300 lbs. (14.68 kN) with 90 psi (6.2 bar) air pressure at the air inlet.
The GB704SH
-
5 and GB704SR installation tools offer a unique
“
split
”
system providing the operator with an ergonomic tool with reduced
hand held weight. The handle and head cylinder assembly when held in hand weighs 2.0 lbs. (.90 kg).
The GB704SH
-
5 series installation tools operate on 90 to 100 psi (6.2
-
6.9 bar) of air pressure, with 90 psi. (6.2 bar) providing the maximum
efficiency. At 90 psi (6.2 bar) of air pressure, the GB704SH
-
5 series does not exceed 81.5 dB(A) and consumes .30 SCF/cycle (8.50 L/cycle).
The air inlet is provided with 1/4
-
18 female pipe thread to accept the users air hose fitting.
NOSE ASSEMBLIES ARE NOT FURNISHED WITH TOOL AND MUST BE ORDERED SEPARATELY. (See nose assembly selection chart on pg. 20).
