9
Rev. 12/14
S/N: 1140 AND ABOVE
PLEASE CONTACT GAGE BILT FOR ALL OTHER SERIAL NUMBERS.
GB7624 SELECTION CHART
Seller warrants that all goods covered by this catalog will conform
to applicable specifications and will replace or repair, F.O.B. our plant, any
goods providing defective from faulty workmanship, or material, for 6
months from date of shipment
.
Said warranty to remain in effect if, and only if, such goods are
used in accordance with all instructions as to maintenance, operation and
use, set forth in manuals and instruction sheets furnished by seller.
Sellers obligation under this warranty shall be limited to the repair
or rework of the goods supplied or replacement thereof, at Seller’s option,
and in no case is to exceed the invoice value of said goods. Under no
circumstances will the seller be liable for incidental or consequential
damages or for damages incurred by the buyer or subsequent user in
repairing or replacing defective goods or if the goods covered by this
warranty are reworked or subjected to any type of additional processing.
This warranty is void if Seller is not notified in writing of any
rejections or defects within 6 months after the receipt of the material by the
customer.
THIS WARRANTY IS MADE IN LIEU OF ALL OTHER WARRANTIES
EXPRESSED OR IMPLIED, INCLUDING MERCHANTABILITY.
WARRANTY
TEFLON® IS A REGISTERED TRADEMARK OF E.I. DUPONT DE NEMOURS CO. LUBRIPLATE® IS A REGISTERED TRADEMARK OF FISKE BROTHERS REFINING CO.
LOCTITE® IS A REGISTERED
TRADEMARK OF HENKEL CORPORATION.
PULL PSI
RETURN PSI
5/8"
20-585-41
6200-6400
3600-3800
3/4"
24-585-46
8800-9200
5600-6000
5/8"
BOM20-585-41
6200-6400
3600-3800
3/4"
BOM24-585-46
8800-9200
5600-6000
5/8"
3/4"
FASTENER
DIA. NOSE ASSEMBLY
HYDRAULIC PRESSURE REQUIRED
HP8
LOCKBOLT
HIGH TENSILE PULL TYPE
C50L®
BOM®
BLIND OVERSIZE MANDREL
NOTE: THE LAST 2 DIGITS OF THE NOSE ASSEMBLY REPRESENTS THE LENGTH THE NOSE
ASSEMBLY EXTENDS FROM THE TOOL. (I.e. -25 = 2.5 inches)
GAGE BILT CERTIFIES THE GB7624 WILL INSTALL THE ABOVE FASTENERS
C50L® AND BOM ® ARE REGISTERED TRADEM ARKS OF ALCOA INC.
HP10.9
16mm
CONTACT GAGE BILT FOR YOUR REQUIREMENTS
CONTACT GAGE BILT FOR YOUR REQUIREMENTS
Rev. 2/15
