Gage Bilt GB745/206-500-5, Оригинальное руководство пользователя

Страница: 4 / 24

4 12/21 REV 9/22
GB745/206 - 500 - 5
SPECIFICATIONS
Hand Held Weight - 2.0 lbs. (.91 kg)
Weight - 12 lbs. (5.44 kg)
Air pressure req'd - 90 - 100 p.s.i. (6.2 - 6.9 bar) Max.
Air consumption - .30 SCF/cycle (8.50 L/cycle).
Hydraulic Oil - Automatic Transmission Oil,
Dexron® III, or equivalent.
Setting stroke - .500" (12.7mm)
Rated pull load - 5,600 lbs. (24.9 kN)
Noise level - Less than 81.5 dB(A)
The GB745/206 - 500 - 5 Split Handle Pneumatic - Hydraulic Installation Tool is designed specifically for the efficient installation of blind
rivets and lockbolt fasteners. This tool ’ s unique "split" system provides the operator with a lightweight ergonomic tool for a fraction
of the cost of other cumbersome power rigs. It has a .500" (12.7mm) fastener setting stroke with a rated pull load of 5,600 lbs. (24.9 kN)
at 90 psi. (6.2 bar) air pressure at the air inlet.
The GB745/206 - 500 - 5 comes with 5 ft. (1.5 m) of hose and a remote actuator. The GB745/206 - 500 - 5 cylinder when held in your hand,
weighs 2.0 lbs. (.91 kg). While the entire split handle installation tool weighs 12 lbs. (5.44 kg).
The GB745/206 - 500 - 5 Split Handle Pneumatic - Hydraulic Installation Tool operates on 90 - 100 psi. (6.2 - 6.9 bar) of air pressure, with 90
psi. (6.2 bar) providing maximum efficiency. At 90 psi. (6.2 bar) of air pressure the GB745/206 - 500 - 5 does not exceed 81.5 dB(A) and
consumes .30 SCF/cycle (8.50 L/cycle).
NOSE ASSEMBLIES ARE NOT FURNISHED WITH THE INSTALLATION TOOL AND MUST BE ORDERED SEPARATELY. (See nose assembly
selection chart on pg. 21).
DESCRIPTION
WARNING :
Any other use is forbidden.
The GB745/206 - 500 - 5 can be operated between 0ºF - 118ºF ( - 17.8ºC / 47.8ºC)
ENVIRONMENTAL USE
WARNING :
Do not operate in an explosive atmosphere.