4
REV. 4/23
GB743V: SN# 2259 AND ABOVE
PLEASE CONTACT GAGE BILT FOR ALL OTHER SERIAL NUMBERS.
DESCRIPTION
WARNING
:
Any other use is forbidden.
ENVIRONMENTAL USE
WARNING
:
Do not operate in an explosive atmosphere.
The GB743V can be operated between 0ºF
-
118ºF (
-
17.8ºC / 47.8ºC)
SPECIFICATIONS
Hand Held Weight
-
6.25 lbs. (2.83 kg)
Air pressure req'd
-
90
-
100 p.s.i. (6.2
-
6.9 bar)
Air consumption
-
.30 SCF/cycle (8.50 L/cycle)
Hydraulic oil
-
Automatic Transmission Oil,
Dexron® III, or equivalent.
Setting stroke
-
.900" (22.86 mm)
Rated pull load
-
4,000 lbs. (17.8 kN)
Noise level
-
81.5 dB(A)
Vibration
-
Tested
-
No hazards found
The GB743V is a pneumatic
-
hydraulic installation tool designed specifically for the efficient installation of blind rivets. It weighs 6.25 lbs. (2.83 kg)
and can be operated in any position. It has a .900" (22.86 mm) fastener setting stroke and a rated pull load of 4,000 lbs. (17.8 kN) with
90 psi (6.2 bar) of air pressure at the air inlet.
The GB743V installation tool operates on 90 to 100 psi (6.2
-
6.9 bar) of air pressure, with 90 psi (6.2 bar) providing the maximum efficiency.
At 90 psi (6.2 bar) of air pressure, the GB743V does not exceed 81.5 dB(A) and consumes .30 SCF/cycle (8.50 L/cycle).
The air inlet is provided with 1/4
-
18 female pipe thread to accept the users air hose fitting.
UNLESS ORDERED FASTENER SPECIFIC (I.E. GB743V/8N), THE STANDARD GB743V IS FURNISHED WITH NOSE ASSEMBLY 8N
-
743
-
24V
AND A SPARE NOSE TIP (10204) TO CONVERT TO A 6N
-
743
-
24V. ALL OTHER NOSE TIPS MUST BE ORDERED SEPARATELY. WHEN
ORDERING TOOL FASTENER SPECIFIC, PLEASE CONTACT GAGE BILT FOR MORE INFORMATION. SEE ACCESSORIES CHART ON
PAGE 19 FOR PART NUMBERS.