7
REV. 8/13
HEAD
Remove nose assembly and adapter from tool before attempting disassembly of head assembly.
WARNING:
DISPOSE OF HYDRAULIC FLUID IN ACCORDANCE WITH ALL ENVIRONMENTAL LAWS AND REGULATIONS
APPLICABLE TO YOUR AREA.
Remove end cap (734111-1). Push against threaded end of head piston (734107) to slide it out of head
cylinder (734102). Be careful not to damage threads or cause burrs on polished piston rod surface.
The re-assembly sequence is the opposite of disassembly. (See Filling and Bleeding instructions.) Apply
Loctite® #242 and torque the button head cap screws (402479) uniformly to 40 inch lbs. to prevent leakage
around the gasket.
S572 - STAT-O-SEAL
400790 - O'RING
402482 - BUTTON HEAD CAP SCREW
734107 - PISTON
401089 - BACK-UP RING
S834 - O'RING
A-289 - O'RING
401112 - BACK-UP RING
S829 - O'RING
734111-1 - END CAP
S834 - O'RING
734102
HEAD CYLINDER ASSEMBLY
703509 - TUBING (10 FT.)
A-216 - FITTING
A-506 - TEE
A-503
ADAPTER
703589- TUBING (10 FT.)
700440 - FITTING
703515 - VACUUM REGULATOR
703537 - FITTING ASSEMBLY
703506 - BOTTLE, BUSHING
AND CAP ASSEMBLY
(TO 703537 & 700440)
A-216
(TO HANDLE)
A-508 - ADAPTER
703518 - MUFFLER
B
A
(TO A-216 (2)
