4
10/12 REV. 1/23
GB731SH S/N: 1015 AND ABOVE
PLEASE CONTACT GAGE BILT FOR ALL OTHER SERIAL NUMBERS.
SPECIFICATIONS
Hand Held Weight
-
2.25 lbs. (1.02 kg)
Entire Tool Weight
-
10.5 lbs. (4.76 kg)
Air pressure req'd
-
90
-
100 p.s.i. (6.2
-
6.9 bar)
Air consumption
-
.16 SCF/cycle (4.53 L/cycle)
Hydraulic oil
-
Automatic Transmission Oil,
Dexron® III, or equivalent.
Setting stroke
-
.600" (15.24 mm)
Noise level
-
Less than 81.5 dB(A)
Rated pull load
-
4,800 lbs. (17.79 kN)
Vibration
-
Tested–
No Hazards Found
The GB731SH is a pneumatic
-
hydraulic installation tool designed specifically for the efficient installation of lockbolts and blind fasteners.
This tool
’
s unique "split" system provides the operator with a lightweight ergonomic tool. The head assembly when held in hand
weighs 2.25 lbs. (1.02 kg). The entire installation tool weighs 10.50 lbs. (4.76 kg). It has a
.600” (15.24
mm) fastener setting stroke.
The GB731SH installation tool operates on 90 to 100 psi (6.2
-
6.9 bar) of air pressure, with 90 psi (6.2 bar) providing the maximum
efficiency. At 90 psi. (6.2 bar) of air pressure, the GB731SH does not exceed 81.5 dB(A) and consumes .16 SCF/cycle (4.53 L/cycle).
The air inlet is provided with 1/4
-
18 female pipe thread for accepting the user's air hose fitting.
The GB731SH comes with 8 feet (2.4 m) of hose. Pull pressure varies with different length hoses. When ordering specify the shortest length hose
possible for your application this will provide optimum pull pressure. For example if your application only requires 5 feet (1.5 m) of
hose order installation tool with
-
5 suffix (GB731SH
-
5). Please consult our engineering department for specific applications.
NOSE ASSEMBLIES ARE NOT FURNISHED WITH THIS INSTALLATION TOOL AND MUST BE ORDERED SEPARATELY. (See nose assembly
selection chart on pg. 23).
DESCRIPTION
WARNING
:
Any other use is forbidden.
ENVIRONMENTAL USE
WARNING
:
Do not operate in an explosive atmosphere.
The GB731SH can be operated between 0ºF
-
118ºF (
-
17.8ºC / 47.8ºC)
