Gage Bilt GB713SR-5, Оригинальное руководство пользователя

Страница: 4 / 24

4
3/21 REV 5/22
GB713SR - 5 INSTALLATION TOOL
SPECIFICATIONS
Hand Held Weight - 2.50 lbs. (1.13 kg)
Air pressure req'd - 90 - 100 p.s.i. 96.2 - 6.9 bar)
Air consumption - .30 SCF/cycle (8.50 L/cycle)
Hydraulic Oil - Automatic Transmission Oil,
Dexron® III, or equivalent.
Setting stroke - .760" (19.30 mm)
Noise level - Less than 81.5 dB(A)
Rated pull load - 4,500 lbs. (20.01 kN)
Vibration - Tested– No Hazards Found
DESCRIPTION
WARNING :
Any other use is forbidden.
ENVIRONMENTAL USE
WARNING :
Do not operate in an explosive atmosphere.
The GB713SR - 5 can be operated between 0ºF - 118ºF ( - 17.8ºC / 47.8ºC)
The GB713SR - 5 is a pneumatic - hydraulic split handle installation tool designed specifically for the efficient installation of blind rivets. This
tool ’ s unique "split" system provides the operator with a lightweight ergonomic tool. The handle and head assembly when held in hand
weighs 2.50 lbs. (1.13 kg). The entire split handle installation tool weighs 7.00 lbs. (3.18 kg). It has a .760" (19.30 mm) fastener setting
stroke.
The GB713SR - 5 split handle installation tool operates on 90 to 100 psi. (6.2 - 6.9 bar) of air pressure, with 90 psi. (6.2 bar) providing the
maximum efficiency. At 90 psi. (6.2 bar) of air pressure, the GB713SR - 5 does not exceed 81.5 dB(A) and consumes .30 SCF/cycle
(8.50 L/cycle).
The GB713SR - 5 comes with 5 feet (1.5 m) of hose. Vacuum systems are available for this tool, please consult our engineering department
for specific applications.
The air inlet has a 1/4 - 18 female pipe thread for accepting the user's air hose fitting.
NOSE ASSEMBLIES ARE NOT FURNISHED WITH TOOL AND MUST BE ORDERED SEPARATELY. (See nose assembly selection chart
on pg. 20 for nose assembly recommendations).