4
Rev. 8/22
GB704SR S/N: 1090 AND ABOVE
PLEASE CONTACT GAGE BILT FOR ALL OTHER SERIAL NUMBERS.
SPECIFICATIONS
Hand Held Weight
-
1.50 lbs. (.68 kg)
Air pressure req'd
-
90
-
100 psi. (6.2
-
6.9 bar)
Air consumption
-
.16 SCF/cycle (4.53 L/cycle)
Hydraulic Oil
-
Automatic Transmission Oil,
Dexron® III, or equivalent.
Setting stroke
-
.540" (13.72 mm)
Rated pull load
-
3,300 lbs. (14.68 kN)
Noise level
-
81.5 dB(A)
Vibration
-
Tested
-
No hazards found.
The GB704SR is a pneumatic
-
hydraulic split handle installation tool designed specifically for the efficient installation of blind fasteners.
This tool
’
s unique "split" system provides the operator with a lightweight ergonomic tool. The handle and head cylinder assembly
when held in hand weighs 1.5 lbs. (.68 kg). The entire split handle installation tool weighs 6.5 lbs. (2.95 kg). It has a
.540” (13.72
mm)
fastener setting stroke.
The GB704SR split handle installation tool operates on 90 to 100 psi. (6.2
-
6.9 bar) of air pressure, with 90 psi. (6.2 bar) providing maximum
efficiency. At 90 psi. (6.2 bar) of air pressure, the GB704SR does not exceed 81.5 dB(A) and consumes .16 SCF/cycle (4.53 L/cycle).
The GB704SR comes with 3 feet (.91 m) of hose. Hoses are attached to the rear of the manifold
-
head assembly. Vacuum systems are
available for this tool, please consult our engineering department for specific applications.
The air inlet is provided with 1/4
-
18 female pipe thread for accepting the user's air hose fitting.
NOSE ASSEMBLIES ARE NOT FURNISHED WITH TOOL AND MUST BE ORDERED SEPARATELY. (See nose assembly selection chart
on pg. 20 for nose assembly recommendations).
DESCRIPTION
WARNING
:
Any other use is forbidden.
ENVIRONMENTAL USE
WARNING
:
Do not operate in an explosive atmosphere.
The GB704SR can be operated between 0ºF
-
118ºF (
-
17.8ºC / 47.8ºC)
