10
11/11 Rev. 9/14
S/N: 1088 AND ABOVE
PLEASE CONTACT GAGE BILT FOR ALL OTHER SERIAL NUMBERS.
HEAD
Remove nose assembly from tool before attempting disassembly of head cylinder assy (704183).
Remove end cap (704112). Push against threaded end of piston (704507) to slide it out of head cylinder assy (704183). Be careful not
to damage threads or cause burrs on polished piston rod surface.
WARNING:
Dispose of Hydraulic Oil in accordance with applicable regulations.
The re-assembly sequence is the opposite of disassembly. (See Filling and Bleeding instructions.) Apply Loctite #242 and torque the
socket head cap screws (400061 and 400066) uniformly to 40 inch lbs. to prevent leakage around the gasket (704129).
704101
NOSE FITTING
A-193 - O'RING
401086 - BACK-UP RING
704507 - PISTON
S829 - O'RING
200232
DEFLECTOR
A-193 - O'RING
A-1118 - POLYSEAL
704112 - END CAP
704183
HEAD CYLINDER
ASSY
400789 - O'RING
400789 - O'RING
(O'RING IN POLSYSEAL
MUST FACE IN
THIS DIRECTION)
401816 - PLUG
704002
EXTENSION ASSY
403764 - O'RING
401080 - BACK-UP RING
204304 - SWIVEL ASSEMBLY
S832 - O'RING
704129 - GASKET
744306 - MANIFOLD-HEAD ASSY
A-317
HYDRAULIC HOSE
400066
SOCKET HEAD
CAP SCREW (2)
400061
SOCKET HEAD
CAP SCREW (2)
204304 - SWIVEL ASSY
(INCLUDES 401080 & 403764)
704311 - AIR LINE
A-144
HOSE CLAMP (2)
S1181
BARBED FITTING (2)
744303 - MANIFOLD-HANDLE
402482
BUTTON HEAD
CAP SCREW (2)
S572 - STAT-O-SEAL (2)
A-663 - HANGER
703560 - HOSE GUARD (NOT SHOWN)
402482 - BUTTON
HEAD CAP SCREW
S572 - STAT-O-SEAL
724017 LEVER ASSY
704130 - AIR ACTUATOR ASSY
