4
Rev. 5/22
S/N: 3158 AND ABOVE
PLEASE CONTACT GAGE BILT FOR ALL OTHER SERIAL NUMBERS.
SPECIFICATIONS
Hand Held Weight
-
5.50 lbs. (2.49 kg)
Air pressure req'd
-
90
-
100 p.s.i. (6.2
-
6.9 bar) Max.
Air consumption
-
.16 SCF/cycle (4.53 L/cycle)
Hydraulic Oil
-
Automatic Transmission Oil,
Dexron® III, or equivalent.
Setting stroke
-
.780" (19.81 mm)
Rated pull load
-
2,200 lbs. (9.79 kN)
Noise level
-
81.5 dB (A)
Vibration
-
Tested–
No Hazards Found
ENVIRONMENTAL USE
WARNING
:
Do not operate in an explosive atmosphere.
The GB703VT can be operated between 0ºF —
118ºF (
-
17.8ºC / 47.8ºC)
The GB703VT is a pneumatic
-
hydraulic tool designed specifically for the efficient installation of blind rivets. It weighs 5.50 lbs. (2.49 kg)
and can be operated in any position. It has a .780" (19.81 mm) fastener setting stroke and a rated pull load of 2,200 (9.79 kN) lbs. with
90 psi (6.2 bar) air pressure at the air inlet.
The GB703VT installation tool operates on 90 to 100 psi (6.2
-
6.9 bar) of air pressure, providing the maximum efficiency. At 90 lbs. (6.2 bar)
of air pressure, the GB703VT does not exceed 81.5 dB (A) and consumes .16 SCF/cycle (4.53 L/cycle).
The air inlet is provided with 1/4
-
18 female pipe thread to accept the users air hose fitting.
THE GB703VT IS SOLD FASTENER SPECIFIC. PLEASE REFER TO PAGE 19 TO PULL ANY FASTENERS OTHER THAN WHAT TOOL
WAS PURCHASED FOR.
DESCRIPTION
WARNING
:
Any other use is forbidden.
