![background image](http://html1.mh-extra.com/html/gage-bilt/gb703srvtpts/gb703srvtpts_original-instructions-manual_3188383004.webp)
4
11/21 REV 3/23
GB703SRVTPTS INSTALLAION TOOL
SPECIFICATIONS
Hand Held Weight
-
1.5 lbs. (.68 kg)
Air pressure req'd
-
90
-
100 psi. (6.2
-
6.9 bar)
Air consumption
-
.16 SCF/cycle (4.53 L/cycle)
Hydraulic Oil
-
Automatic Transmission Oil,
Dexron® III, or equivalent.
Setting stroke
-
.780" (19.81mm)
Noise level
-
No noise hazards identified.
Rated pull load
-
2,200 lbs. (9.79 kN)
Vibration
-
Tested –
No Hazards Found
The GB703SRVTPTS is a pneumatic
-
hydraulic split handle installation tool designed specifically for the efficient installation of blind
fasteners. This tool
’
s unique "split" system provides the operator with a lightweight ergonomic tool. The head assembly when held in
hand weighs 1.5 lbs. (.68kg). The entire split handle installation tool weighs 11 lbs. (5.0 kg). It has a
.780” (19.81
mm) fastener setting stroke.
The GB703SRVTPTS split handle installation tool operates on 90 to 100 psi (6.2
-
6.9 bar) with 90 psi. (6.2 bar) providing maximum efficiency.
At 90 psi, (6.2 bar) the GB703SRVTPTS does not exceed 81.5 dB(A) and consumes .16 SCF/cycle (4.53 L/cycle).
The GB703SRVTPTS comes with 3 feet (.91 m) of hose. The air inlet is provided with 1/4
-
18 female pipe thread for accepting the
user's air hose fitting.
THE GB703SRVTPTS IS SOLD FASTENER SPECIFIC. TO CHANGE TOOL OVER TO INSTALL OTHER FASTENERS, SEE CHART ON
PAGE 20 FOR PART NUMBERS.
The GB703SRVTPTS can be operated between 0ºF
-
118ºF (
-
17.8ºC / 47.8ºC)
DESCRIPTION
WARNING
:
Any other use is forbidden.
WARNING
:
Do not operate in an explosive atmosphere.
ENVIRONMENTAL USE