4
REV 1/20
GB2600 / GB2600A INTALLATION TOOL S/N: 1001 AND ABOVE
PLEASE CONTACT GAGE BILT FOR ALL OTHER SERIAL NUMBERS
SPECIFICATIONS
Weight
- 7.3 lbs. (3.3 kg)
Hyd. pressure req'd
- 7,400 psi (510.2 bar) PULL
3,200 psi (220.6 bar) RETURN
Hyd. Power Source
- GB940 Power Unit or equivalent
- GB910 Power Unit or equivalent
Hydraulic Oil
- See power unit for hydraulic oil specifications
Setting stroke
- 1.25” (31.8 mm)
Rated pull load
- 13,840 lbs. (61.6 kN) @ 5,700 psi (393 bar)
Noise level
- No noise hazards identified. (20 max dB(A)
Vibration
- Tested– No vibration hazards.
Max Flow Rate
- 2 gpm (7.5 L/M)
Max Inlet Temperature
- 118º F (47.8º C)
The GB2600 and the GB2600A are hydraulic installation tools designed specifically for the efficient installation of blind fasteners and
up to 7/16” (11.1 mm) pintail-style lockbolts.
The hydraulic installation tool weighs 7.3 lbs. (3.3 kg). It has a 1.25" (31.8 mm) fastener setting stroke and a rated pull load of 13,840 lbs.
(61.6 kN) @ 5,700 psi. (393 bar).
The GB2600 electric actuated installation tool operates on hydraulic pressure developed by the GB940 or equivalent power unit set at
7,400 psi (510.2 bar) maximum PULL pressure and 3,200 psi. (220.6 bar) maximum RETURN pressure. The tool comes equipped with
2 feet (.61 m) of hydraulic hoses and couplings, electric actuator and cord.
The GB2600A air actuated installation tool operates on hydraulic pressure developed by the GB910 or equivalent power unit set at
7,400 psi (510.2 bar) maximum PULL pressure and 3,200 psi. (220.6 bar) maximum RETURN pressure. The tool comes equipped with 2
feet (.61 m) of hydraulic hoses, swivels and couplings, air actuator and tube.
ALL GAGE BILT HYDRAULIC INSTALLATION TOOLS ARE COMPATIBLE WITH EQUIVALENT POWER UNITS. NOSE ASSEMBLIES ARE
NOT FURNISHED WITH THESE TOOLS AND MUST BE ORDERED SEPARATELY. (See nose assembly selection chart on pg. 15).
WARNING
:
Any other use is forbidden.
DESCRIPTION
The GB2600 AND GB2600A can be operated between 0ºF - 118ºF (-17.8ºC / 47.8ºC)
ENVIRONMENTAL USE
WARNING
:
Do not operate in an explosive atmosphere.
