H.264 Network Digital Video Recorder User Manual
24
number of cruise in the value blank, then click Cruise between Points button, PTZ begins to work on the cruise
line. Click Stop button to stop cruise.
3
、
Scan
PTZ also can work on the preset scan line repeatedly.
1
）
Scan setup
Step1
：
In Picture 3.8, click Setup button ,enter Picture 3.12
；
Step2
：
Click Scan button
，
the input proper value in the scan value blank;
Step3
：
Click Start button, enter Picture 3.8
，
here you can set the following items: Zoom
、
Focus
、
Aperture
、
Direction and so on. Click Setup button to go back Picture 3.12
；
Step4
：
Click End button to complete setup
。
Click the right button of the mouse to exit.
Picture 3.12 Scan Setup
2
）
Scan Calls
In Picture 3.8, click Page Shift button, then enter PTZ control menu as shown in Picture 3.10. Please
input the number of scan in the value blank , then click Scan button
，
PTZ begins to work on the scan line .
Click Stop button to stop.
4
、
Boundary Scan
In the horizontal line, set up a line, called linear sweep, PTZ repeated according to the route setting
operation.
1
）
Boundary Scan setup
Step1
：
In Picture 3.8, click Direction button to turn the PTZ to preset direction, then click Setup button
enter Picture 3.13, select the left boundary, return to Picture 3.8;
Step2
：
Please click direction arrows to adjust PTZ direction, click Setup button enter Picture3.13, then
select the right boundary ,return to Picture 3.8;
Step3: Complete setup, that is the position of left and right boundary
Scan value blank
Scan Button
