(A) Assemble the mop head: place the mop head under the rotating disc, step on
the disc, you will know the mop head is attached when you hear a "click".
(B) Removing the mop head: step on the white fibre and pull the handle upwards.
(C) Adjusting the angle of the handle: simply turn the handle about 45 degrees, then
turn the handle to the left or right to set the angle you want. The rotating disc will
rotate 360 degrees.
(D) Water level: do not pour water over the level mark on the bucket, to prevent the
water from overflowing.
(E) Place the mop face down in the rotating basket.
(F) Make sure that the entire white fibre head is inside the basket.
(G) Pull the non-slip handle down and hold on to the handle.
INSTRUCTIONS
8
Rev.1
