5
12V AGM+
(Hold Mode
button for 3
seconds to
enter)
14-230
Charging 12V advanced AGM batteries that
requires a higher than normal charging
voltage (Blue LED)
12V LITHIUM
(Hold & Press)
14-230
Charging 12V lithium-ion batteries only,
including LiFePO4 (White LED)
REPAIR (Hold
& Press)
14-230
An advanced battery recovery mode for
repairing old, idle, stratified or sulfated
batteries. REPAIR Yellow LED + 12V/24
mode LEDs
13.6V SUPPLY
(Hold & Press)
–––
Converting to a DC power supply for
powering 12V DC device or as a memory
retainer when replacing a battery (Yellow
LED)
These
“
Hold or / and Press
”
modes are advanced charging modes that
require your full attention before selecting.
Using 12V AGM+ (Hold)
This mode is designed for 12V advanced AGM batteries only. Advanced
AGM batteries are typically found in startstop micro-hybrid vehicles.
These batteries accept a higher than normal charging voltage. 12V
AGM+ charge mode is NOT suitable for traditional AGM batteries.
Consult the battery manufacturer before using this mode.
Using 12V LITHIUM (Hold & Press)
This mode is designed for 12V lithium-ion batteries only, including
LiFePO4. Some lithium-ion batteries may be unstable and unsuitable for
charging. Consult the lithium battery manufacturer before charging and
ask for recommended charging voltage and current.
Using REPAIR (Hold & Press)
This mode is for LEAD-ACID batteries only. It is an advanced battery
recovery mode for repairing old, idle, stratified or sulfated batteries.
NOT all batteries can be recovered. For optimal results, take the battery
through a full charge cycle, bringing the battery to full charge, before
using this mode. When this mode is chosen, do remember press Mode
