GABOR FSM-L Скачать руководство пользователя страница 3

3

• 

When installing this product, be sure to refer to the mounting 

instructions detailed in this manual; failure to abide by the mounting 
instructions may void the product’s warranty.

• 

Do not use this product for any flat-panel display other than what it is 

intended for; the exact specification, size parameters, and weight 
limits are found both on the product box and in the instruction manual.  

• 

It is strongly recommended that this product be installed by a qualified 

professional or installation contractor; Gabor takes no responsibility 
for any product damage or personal injury resulting from mishandling, 
incorrect mounting, faulty assembly, or improper use of this product. 

• 

This product has been designed specifically for mounting directly on 

wooden studs or concrete walls; depending on wall type and material, 
the use of additional appropriate mounting hardware and/or 
accessories such as heavy-duty anchors may be required. 

• 

The supplied mounting hardware is not intended for use on metal 

studs or cinder block walls, and may not be appropriate for old or weak 
walls; it is best to consult with a qualified professional to determine 
whether your wall is capable of supporting this bracket. 

• 

Do not mount the device on structures that may be affected by 

vibrations or noticeable impacts; do not install near a heater, fireplace, 
or any other source of direct heat energy.

• 

It is recommended that at least 2 people perform the installation 

process to prevent injury from mishandling or dropping the product 
and/or flat-screen device.    

• 

This product may contain small parts which can possibly pose a 

choking hazard; keep out of reach of children and pets.

• 

Excessive exposure to liquids may damage the finish of this product; 

when cleaning this product, use only a mild detergent solution, and 
quickly wipe dry with a soft cloth.

• 

All images are for illustrative purposes only.

Safety Warnings

Содержание FSM-L

















Отзывы: